Free · No login · in, cm and px

T-shirt design placement guide

Pick a spot on the shirt or hoodie and see where the design sits, how far below the collar, and how big to make the file, from printers' own size guides.

Works onT-shirtsHoodiesDTFScreen printingPrint on demand

Placement

Shirt size

Full front placement on a t-shirt, front view

T-shirt · front · size L

Full front

The main print of a graphic or text tee: the size buyers expect on a design-led shirt.

Size
10 to 11 in wide (25 to 28 cm), about 12 to 13 in tall (30 to 33 cm)
Where
Top 2.5 to 3 in (6 to 8 cm) below the collar seam
File at 300 DPI
3,300 px wide × 3,900 px tall (at 10 in: 3,000 px)
From
DTF Transfers NowOther printers: Sam's DTF Transfers, M–L, 10 in wide; UploadDTF, S–L, 10 in wide; Transfer Kingdom, adult front, 11 in wide, 11 in tall

The drawing is an adult L. The grey boxes are the other placements on this side. Your printer's product page has the final print area for each blank.

14 placements, drawn to scale

Full front by size, oversized, center chest, left chest, pocket, full back, upper back, back of the neck and sleeve on a tee; front, left chest, back, sleeve and cuff on a hoodie.

Inches, centimetres and pixels

Each placement gives the print size, how far below the collar it sits, and the file size at 300 DPI, so the artwork is made at the right size the first time.

Numbers you can trace

Every size comes from a transfer printer's published guide, with the printer named and linked, and the figures other printers give listed next to it.

Where to put a design on a t-shirt

Most shirts carry their design in one of five spots: the full front, a band across the chest, a small mark on the left chest, the back, or the sleeve. The table gives the sizes transfer printers publish for an adult L and where each one sits. Pick a spot in the guide above to see it on the shirt.

PlacementTypical sizeWhere
Full front (L)10 to 11 in wide, 12 to 13 in tallTop 2.5 to 3 in below the collar seam
Center chest8.5 × 4 inTop 2.5 to 3 in below the collar
Left chest3.5 × 2 inCentre 2.5 to 3 in below the collar, 3.5 to 4 in from the middle
Full back12 × 14 inTop 3 to 4 in below the back collar
Back of the neck2.5 × 2.5 inCentred 1 to 2 in below the back collar seam
Sleeveabout 3 in across, up to about 6 in down the arm1 in above the sleeve hem

The sizes come from DTF transfer printers' own guides (DTF Transfers Now, UploadDTF, Sam's DTF Transfers, Transfer Kingdom and ScreenPrinting.com). Our DTF size chart lists every row with its source, youth and baby sizes included.

How far below the collar?

The most common mistake on a front print is placing it too low. A design that sits in the middle of the shirt on a screen ends up on the stomach once the shirt is worn. Printers put the top of a full front print 2.5 to 3 inches below the collar seam, which on most adults is about the width of three or four fingers laid flat under the collar. On a hoodie the measure that matters is the pocket: the front print sits above it with a little room to spare, because ink over the pocket seam does not lie flat.

Left chest logo size

A left chest mark is small: 3.5 × 2 inis the size printers give for an adult tee, and hoodies take up to 4 × 4 in. It sits on the wearer's left, which is on your right when you look at the shirt from the front. Keep the artwork simple and readable at that size: a one-word mark or a small icon works, a detailed illustration turns into a blur.

One design, several shirt sizes

A front print that fits an S looks lost on a 2XL, and one sized for a 2XL runs off a small. Printers handle this by giving the width per size, from about 9 inches on an S to about 12 on a 4XL. Switch the size in the guide to see the box change. Print on demand services usually print one file on every size, so make the artwork for a middle size and check that it still sits well on the smallest one.

Back, neck and sleeve prints

The back is the largest canvas on a tee and the only one with nothing in the way. A full back print often pairs with a small left chest mark on the front, a combination many brands use. The back of the neck takes a tiny mark, under the collar. On a sleeve, keep the design narrow and put its lower edge about an inch above the hem, so it does not fold into the seam. On a hoodie, a long sleeve takes a word or a pattern running down the arm, and the cuff takes a small mark.

Make the file the right size

Print files are usually made at 300 DPI: a 10 inch wide front print needs a file about 3,000 pixels wide, and a 3.5 inch left chest logo about 1,050. The guide shows the pixel size for each placement. The print size calculator converts any size, and the t-shirt and hoodie template shows your own design in place before you order a sample.

Placement is the last step

Where the design goes matters once you know the design is worth making. Trendlytic shows which designs are selling on Etsy, Redbubble, TeePublic and Amazon US in a niche, marks the new ones already rising, and checks a phrase against the USPTO register in one click. It costs $19.99/month for 100 credits, which read up to 6,000 designs on the marketplaces with a verdict on every niche, plus the 1,000 top designs in Best Design Instant, re-ranked every hour, after a 3-day trial that takes a card. Start the trial.

You know where the design goes. Which design should it be?

Trendlytic shows which t-shirt and hoodie designs are selling on Etsy, Redbubble, TeePublic and Amazon US, which new ones are already rising, and puts any phrase you choose against the USPTO register in one click.

Start free 3-day trial

3-day free trial ($1 card check) · from $19.99/mo · cancel anytime

Frequently asked questions

Where should a design go on a t-shirt?

For a full front print, the top of the design sits 2.5 to 3 inches below the collar seam and the design is centred. A left chest logo is centred 2.5 to 3 inches below the collar and 3.5 to 4 inches from the middle, and a back print starts 3 to 4 inches below the back collar. Those are the distances transfer printers publish; the guide shows each one on the shirt.

How big should a t-shirt design be?

On an adult L, a full front print is about 10 to 11 inches wide and 12 to 13 tall, a back print about 12 by 14, a center chest band 8.5 by 4 and a left chest logo about 3.5 by 2. Widths change with the shirt size, from about 9 inches on an S to about 12 on a 4XL.

What size is a left chest logo?

About 3.5 by 2 inches on an adult tee, and up to 4 by 4 on a hoodie. Printers give 3 to 5 inches wide depending on the logo: small icons at the low end, wide text at the high end.

How many pixels does a t-shirt print file need?

At 300 DPI, multiply the inches by 300: a 10 inch wide front print needs about 3,000 pixels, a 12 by 14 inch back print 3,600 by 4,200, and a 3.5 inch left chest logo about 1,050. The guide shows it for every placement.

Where do the sizes come from?

From the size guides that DTF transfer printers publish (DTF Transfers Now, UploadDTF, Sam's DTF Transfers, Transfer Kingdom and ScreenPrinting.com), named and linked next to each number. The drawing is an adult L; your printer's product page has the final print area for each blank.

More free tools